£399.99
The revised NerdQAxe++ Rev 6.1 Black Edition, upgraded by The Solo Mining Co with a custom metal stand, I Am GPIO Halo board, LED remote control, rear fan control and rear power entry.
Approx. 6 TH/s at around 115-120 W, powered by four BM1370 ASICs and running open-source AxeOS.
UK Stock.
Not ready to buy? Rent a NerdQAxe++ on solar from £2 a day →
With I Am GPIO Halo Upgrade
UK Stock.
The NerdQAxe++ Rev 6.1 Black Edition Bitcoin Miner is a compact, high-performance, multi-chip home ASIC designed for miners who want real hashrate without industrial noise, ugly hardware, or a datacentre in the spare room.
This is the updated Rev 6.1 Black Edition hardware, built around four BM1370 ASIC chips from the Antminer S21 series and tuned to deliver approximately 6 TH/s at around 115-120 W.
It keeps the open-source, desk-friendly NerdQAxe spirit, but uses the revised hardware platform designed to address the weak points and early-life gremlins seen on earlier versions.
This version is then upgraded by us, The Solo Mining Co, with our own custom metal stand, the signature I Am GPIO Halo board, remote control LED functionality, rear fan control, and rear power entry for a cleaner, more premium finished unit.
It is a serious little Bitcoin miner with proper desk presence.
Earlier NerdQAxe++ revisions proved the concept: a compact, multi-chip, open-source Bitcoin miner with genuine home-friendly performance. The NerdQAxe++ Rev 6.1 Black Edition is the refined version, with critical updates designed to engineer out the V-Reg issues seen previously.
We have revised the hardware, including updates to the BM1370 footprint, solder paste stencil, power-stage layout details, snubber cap’ values and supporting components, meaning we have a solid mining platform.
In plain English: this is the cleaned-up, improved version designed to run better, last longer, and remove the little gremlins that affected earlier boards.
This listing is for the Rev 6.1 Black Edition
This is not just a bare NerdQAxe++ board dropped on a basic stand. This is the NerdQAxe++ Rev 6.1 Black Edition.
Our upgraded edition includes:
The result is a much more finished product: cleaner cabling, better presence, better usability, and a more deliberate home-mining feel.
The NerdQAxe++ Rev 6.1 Black Edition uses four BM1370 chips from the Antminer S21 family, some of the most efficient Bitcoin mining chips currently used in open-source home mining hardware.
At this power level, it gives you meaningful hashrate while still being practical to run in a home, office, workshop, studio or test bench environment.
The built-in LILYGO T-Display S3 turns the NerdQAxe++ Rev 6.1 Black Edition into a live mining dashboard.
At a glance, you can monitor:
The two physical buttons can be used to cycle display views or support custom functions depending on firmware configuration.
The NerdQAxe++ Rev 6.1 Black Edition runs AxeOS, the open-source firmware used across the Bitaxe and NerdQAxe ecosystem.
Setup is handled through a simple web interface. Connect the miner to your Wi-Fi, open its IP address in a browser, and you can configure pools, monitor performance, adjust settings and manage the device from your phone, tablet or computer.
AxeOS also supports viewing multiple compatible devices as a swarm, making it ideal if you already run Bitaxe-style miners or plan to build a small home mining fleet.
Cooling is handled by a Thermalright AXP90 X36 low-profile cooler, using standard computer-style mounting patterns. This makes the NerdQAxe++ far more familiar and mod-friendly than a sealed black-box miner.
This upgraded Solo Mining Co version also includes rear fan control, helping support stable cooling while keeping the unit suitable for a desk, shelf or home-office environment.
It is not silent, but it is a world away from traditional industrial ASIC miners.
One of the practical upgrades on the NerdQAxe++ Rev 6.1 Black Edition is the rear power entry, giving the miner a cleaner and more natural layout when placed on a shelf, desk or display stand.
Instead of cables fighting the look of the product, the power entry is moved to where it makes sense: out the back, neat and tidy.
This is especially useful for display setups, office shelves, YouTube backdrops, workshops, desks and premium home-mining spaces.
The NerdQAxe++ does not run from USB power.
USB-C is for optional data access and debugging only. The miner requires a suitable 12 V / 12.4 V XT30 power supply, which is included.
